I only heard of this band today and I love them. Their music is very soothing.... and beautiful women singing along to violins... what more can you ask for :-)
This is a collection of stories of things that I experience, use, collect, review or just feel to talk about here in Trinidad or other places I visit. If you like what you see please comment or share it with others.
Sunday, December 12, 2010
Friday, December 3, 2010
How to recalibrate touch screen on Toshiba e-Studio 202 copier/printer
Sometimes settings get messed up for no apparent reason and it can be very frustrating. I had problems with the touch screen on a floor standing copier where you had to touch the top left of the images of buttons for the machine to recognise the button you wanted. The touch screen calibration has gone off and needs to be recalibrated. It is a Toshiba e-studio 202. The process to fix it is as follows:
Press the energy saver button
Select 'Shutdown' and wait for the machine to turn off.
Press and hold the '0' and '8' digit buttons together then with the digits still pressed, switch the power button to ON.
After a few seconds you will hear a beep and then see a blank screen with 'Test Mode' on the top.
On the number pad enter '692' and press the 'Start' button.
You will see two cross-hairs with a pointer next to #1. Press the center of cross-hair #1 and then the center of cross-hair #2.
Note: you can use the top of a pen to accurately touch the screen and you may have to touch slightly off the center to get it registered.
After you press the center of #2 you will go back to the blank screen.
Turn off the machine with the power button.
Turn on the machine with the power button and try out the touch screen.
Note: You may have to repeat the process to get the calibration right. What worked for me is touching the top right of #1 and the center of #2 for the copier to be usable again.
This same process should work for other Toshiba e-Studio floor standing copiers/scanners.
Press the energy saver button
Select 'Shutdown' and wait for the machine to turn off.
Press and hold the '0' and '8' digit buttons together then with the digits still pressed, switch the power button to ON.
After a few seconds you will hear a beep and then see a blank screen with 'Test Mode' on the top.
On the number pad enter '692' and press the 'Start' button.
You will see two cross-hairs with a pointer next to #1. Press the center of cross-hair #1 and then the center of cross-hair #2.
Note: you can use the top of a pen to accurately touch the screen and you may have to touch slightly off the center to get it registered.
After you press the center of #2 you will go back to the blank screen.
Turn off the machine with the power button.
Turn on the machine with the power button and try out the touch screen.
Note: You may have to repeat the process to get the calibration right. What worked for me is touching the top right of #1 and the center of #2 for the copier to be usable again.
This same process should work for other Toshiba e-Studio floor standing copiers/scanners.
Wednesday, December 1, 2010
Wicked surround sound demo
This is a very cool demo on how surround sound should work. You hear things not just front back and sides but below and above you too... yea with stereo headphones. Don't believe me?
http://www.2loop.com/hsound.html
http://www.2loop.com/hsound.html
Flow IP
I was on the same flow IP for at least the last 11 months at home even though I do not pay for a static IP. I cannot remember before that but today I noticed it has changed. Is there a one year expiry on it?
Subscribe to:
Posts (Atom)